Decorative aluminum Mounting Frames eliminate the pressure of making an exact cutout for the panel to fit in and are available in three designs: High Profile, Slim, and Recessed Slim. Recessed and High Profile Frames recess the panel to help prevent accidental turning on or off of circuit breakers. In addition, a smoked or clear Plexiglas door may be installed for added protection of the panel.
All Slim Frames are ideal for smaller areas; the flange is only 7/8”. All frames are available in custom sizes to fit your specific customized panel configuration. They may be used to accommodate multiple panel combinations and may also be hinged to allow for easier installation and future service of the electrical system. Designed for the marine environment with durable materials, these frames create an elegant, finished look.
Mounting Frames Benefits:
Reduce installation time
Help to prevent accidental turning on or off of critical circuits
Enhance the panel installation
Conceal bulkhead cutout imperfections
Provide the option to add Plexiglas doors
High Profile Frame benefits:
Panel is recessed to help prevent from the accidental turning off of circuit breakers in high traffic areas
Installation time is reduced considerably
Frame flange hides possible imperfections in bulkhead cutout
Smoked or clear plexiglass door may be installed for additional protection
Especially useful on multiple panel installations
Slim Frame benefits:
Provides a low profile mounting
Mounts in smaller areas with only a 7/8” flange
May be hinged for easier installation and future service to the panel
Frame flange hides possible imperfections in bulkhead cutout
Recessed Slim Frame benefits:
Panel is recessed to help prevent from the accidental turning off of circuit breakers in high traffic areas
Mounts in smaller areas with only a 7/8” flange
May be hinged for easier installation and future service to the panel
Smoked or clear Acrylic plexiglass door may be installed for additional protection
IAFS
Paneltronics’ IAFS (Independent Access Framing System) provides easy independent access to the AC and/or DC panels, mounted in a single frame.
These attractive Frames are custom made to any size and fit most panel boards.
Partitioned enclosures are also available for additional protection to the back of the distribution panel(s) and offer full compliance with ABYC 11.9.1.1.
1
2
3
4
5
6
7
8
9
10
11
12
13
Enclosures Benefits
Electro-Mechanical protection to exposed components
Custom sized to fit most panel configurations
Can be used for a variety of applications
Custom wire access ports can be added
Protecting the electrical connections at the panel can help prevent potential electrical
hazards. Paneltronics’ enclosures protect the wiring in situations where the back
of the panel may be exposed. Terminal blocks and bus bars can also be mounted on
the back plate of the enclosure providing a central location for your wiring. Enclosures
are available in standard depths, while the widths and heights are custom sized
to meet your requirements.
Paneltronics’ enclosures are designed for the harsh marine environments and constructed
of durable, corrosion resistant aluminum.
Mounting Frames Benefits: 
Paneltronics’ IAFS (Independent Access Framing System) provides easy independent access to the AC and/or DC panels, mounted in a single frame. 
